Inspiration

H Beam/ H Section Steel

Product Overview

H beam is a hotrolled structural steel with an Hshaped cross-section, composed of one vertical web and two parallel flanges. Compared with traditional I-beam, H section steel delivers higher bending stiffness, better lateral stability and more convenient connection. Its material is distributed rationally to achieve an outstanding strengthtoweight ratio, which saves steel consumption and reduces the overall dead load of structures. It is one of the most widely used profiles for modern steel construction and engineering projects.

Classification & Technical Definition (HW / HM / HN)

Under GB/T 11263 standard, hotrolled H beams are divided into three main series according to the proportion of flange width to section height:

  • HW – Wide Flange H Beam Flange width ≈ section height, nearly square cross-section. It owns balanced stiffness on both axes, suitable for compression members. Mainly used for steel columns, support posts and heavy frame structures.
  • HM – Medium Flange H Beam Flange width reaches approximately 60%–75% of section height. It is the most versatile type, applicable for both beams and columns, widely adopted in building frames, composite frames and mediumloaded structural systems.
  • HN – Narrow Flange H Beam Flange width is much smaller than section height. The deep section is optimized for major-axis bending performance. It is the preferred choice for main girders, floor beams, long-span roof beams and purlins.

Core Advantages

  1. High structural efficiency: Parallel flanges provide larger section modulus. Under equal load requirements, it saves 10%–15% steel compared with I-beam.
  2. Easy fabrication & connection: Flat and parallel flange surfaces simplify welding, bolt connection, cutting and prefabrication.
  3. Light self-weight: Lower dead load reduces foundation investment and facilitates fast installation.
  4. Good seismic & impact resistance: Excellent plasticity and toughness, suitable for seismic zones and structures bearing dynamic loads.
  5. Flexible design: Supports large clear spans, maximizes usable space for buildings.

Main Applications

  • Industrial buildings: factory portal frames, workshop columns, crane girders, mezzanine floors and equipment support platforms
  • Commercial & high-rise buildings: steel frame columns, transfer beams, floor girders and bracing members
  • Infrastructure: pedestrian bridges, viaduct substructures, tunnel supports and municipal engineering
  • Other fields: photovoltaic support frames, logistics warehouse structures, marine platform supports and prefabricated building systems.

Specification & Technical Parameters

ItemDetails
Product NameHot Rolled H Section Steel / H Beam
SeriesHW (Wide Flange), HM (Medium Flange), HN (Narrow Flange)
Executed StandardsGB/T 11263, EN 10034, ASTM A6, JIS G3192
Common Steel GradesQ235B, Q355B, S235JR, S355JR, A36, A572Gr50
Dimension RangeHeight: 100 mm ~ 900 mm; Flange width: 100 mm ~ 400 mm
Standard Length6 m, 9 m, 12 m; custom cutting length available
Surface ConditionBlack hotrolled finish, blast cleaning, painting, hotdip galvanizing on request
InspectionMill test certificate, thirdparty inspection acceptable
DeliveryBulk packing, bundled with steel strips

Selection Guide

Choose HW when you need stable compression capacity for columns; select HM for general frames under combined compression and bending; adopt HN for long-span beams dominated by bending load. Final specification shall be confirmed by structural engineers based on load, span, buckling condition and local design code.

Contact Us

We supply full range of HW, HM and HN H beams with stable quality and competitive delivery. Send your drawing, required grade and quantity for quotation.

发表回复

您的邮箱地址不会被公开。 必填项已用 * 标注